The rectifiers are Schottky with with as low of a forward voltage as I could find in my junk box. The lower the forward voltage the better, because this is where you will lose a lot of the power. The capacitors I had were also out of my junk box, they were 8600uF 10V.
Hi Kirk.
What kind of rectifiers and capacitance are used in the stepper motor project?
Regards from Norway
Aage
Hi Aage,
The rectifiers are Schottky with with as low of a forward voltage as I could find in my junk box. The lower the forward voltage the better, because this is where you will lose a lot of the power. The capacitors I had were also out of my junk box, they were 8600uF 10V.
Kirk