June 9th, 2019, by John Bump
Japanese joinery is famously intricate, with centuries of history using hand tools to provide robust, durable, and beautiful joints in wood without the use of metal fasteners. John decided to go about making these by using modern CAD/CAM software and a CNC mill to rough out a joint known as a Stepped Gooseneck Splice, in Japanese, Koshi-kake Kamatsugi. This joint is used where wood sees intermittent tensile stress, like the lintel of a doorway. Traditionally this is done with a lot of attention to layout and a painstaking process of chiseling out wood and fitting up the result. The Mad Scientist Hut.
John chose to do this by modeling the joint in FreeCAD, then processing the solid model in PyCAM. PyCAM produced some layers that had extraneous vertical retractions and plunges, so he goes through how to edit g-code to copy good paths to lower layers that have flaws. Alternatively, he could have tried out Heekscad, another CAM program available for GNU/linux with a fairly robust CAM processor. John chooses to rough out the cut with a 0.25″ millbit that just cuts in straight lines to remove material quickly, then trace the outline of the cut with a 0.125″ mill to get a good representation of the final shape, which he cleans up by hand with a chisel. The result is a joint that has the same function and look as a traditional one, in a fraction of the time. Check out the video after the break.
This requires control over the Z axis, which many CNC routers don’t have, although here’s a previous Hackaday article about adding Z axis control to your router.
Note to anyone confused by this post: it’s my reference material for applying to be a Hackaday editor. Once that’s done, I’ll come back and clean it up and turn it into a substantiative post about Japanese joinery.